Zippy M1W3-6950P (1Yr)

฿32,000.00

330 x 383 x 42mm (DxWxH)
► VOLTAGE: 100V ~ 240VAC (WITH ± 10% TOLERANCE)
► FREQUENCY: 47Hz ~ 63Hz
► INPUT CURRENT: 20-10A MAX AT ANY LOW/HIGH INPUT VOLTAGE
► INRUSH CURRENT: 60/100A @ 115/230VAC (25℃)
► POWER FACTOR CORRECTION: 95% @ 110V, FULL LOAD

Description

Dimension 330x383x42(mm)
12.99×15.07×1.65(inch)
Input Spec VOLTAGE: 100V ~ 240VAC (WITH ± 10% TOLERANCE)

FREQUENCY: 47Hz ~ 63Hz

INPUT CURRENT: 20-10A MAX AT ANY LOW/HIGH INPUT VOLTAGE

INRUSH CURRENT: 60/100A @ 115/230VAC (25℃)

POWER FACTOR CORRECTION: 95% @ 110V, FULL LOAD

DC Output Spec
Output Voltage Output Current Min. Output Current Max. Regulation Load Regulation Line Output Ripple & Noise Max.[P-P]
5V 6.0 56 ± 5% ± 50mV 70mV
12V 6.0 60 ± 6% ± 50mV 120mV
-5V 0.2 1.2 +5%, -10% ± 50mV 120mV
-12V 0.2 1.2 +5%, -10% ± 50mV 120mV
3.3V 3.5 44 ± 5% ± 50mV 70mV
+5VSB 0.4 3.5 +5%, -6% ± 50mV 70mV
Feature * TEMPERATURE RANGE: OPERATING: 0℃ — 40℃
STORAGE: -20℃ — 80℃
* HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95%
* REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS
* HOLD UP TIME: 16 ms MINIMUM AT FULL LOAD & NORMAL INPUT VOLTAGE
* DIELECTRIC WITHSTAND: INPUT / OUTPUT 1500 VAC FOR 1 SECOND
INPUT TO FRAME GROUND 1500 VAC FOR 1 SECOND
* EFFICIENCY: 67% TYPICAL AT 115VAC FULL LOAD
* POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
* OVER POWER PROTECTION: 110% ~ 180%
OVER VOLTAGE PROTECTION: +5V→ 5.7V ~ 6.5V, 3.3V→ 3.9V ~ 4.7V
+12V → 13.3V ~ 14.3V
OVER CURRENT PROTECTION: 110% ~ 180%
* SHORT CIRCUIT PROTECTION: +5V, -5V, +12V, -12V, +3.3V
* EMI NOISE FILTER: FCC CLASS A, CISPR22 CLASS A
* SAFETY: UL 1950, CSA 22.2 NO/ 950, TÜV IEC 950
* REMOTE ON / OFF CONTROL
THE UNIT SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE / ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STANDBY), AS LOGIC LEVEL IS LOW, OUTPUTS VOLTAGE WERE ENABLE, AS LOGIC LEVEL IS HIGH, OUTPUTS VOLTAGE WERE DISABL * 3.3V / 5V REMOTE SENSING*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

Reviews

There are no reviews yet.

Be the first to review “Zippy M1W3-6950P (1Yr)”